Thermistors with Wide Ohmic Resistance Range
Features:
• 5 to 200K Ohms Resistance @25ºC
• Proven Stability and Reliability
• Glass Encapsulation
• 24 AWG Tin/Nickel Plated Copper Leads
• Temperature Range -40ºC to +250ºC
• RoHS Compliant
APPLICATIONS
• Low cost probe assemblies
• Consumer electronics
• PCB temperature sensing
• Air conditioning
Stability
Reliability Tests Standard Test Condition Delta R
Storage temperature: 200°C & 250°C Storage in Dry Heat IEC
60068-2-2
Duration: 1000 hours
< 3%
Temperature of air is 40°C & RH 93% Storage in Damp Heat IEC
60068-2-3
Duration: 56 days.
< 2%
Lower Test Temperature -55°C
Rapid Temperature Cycling IEC 60068-2-14 Upper Test Temperature
+200°C
Number of Cycles 50
< 2%
Product Definition
Part Number Resistance [Ω] @ +25ºC Tolerance @ +25ºC Beta Value
25/85 Beta Tolerance Operating Temperature
5KF3550DPGS 5,000 ± 1% 3550 ± 2% -40º to +200ºC
10KF3270DPGN 10,000 ± 1% 3270 ± 2% -40º to +250ºC
10KF3435DPGS 10,000 ± 1% 3435 ± 2% -40º to +200ºC
10KF3550DPGN 10,000 ± 1% 3550 ± 2% -40º to +250ºC
10KF3700DPGN 10,000 ± 1% 3700 ± 2% -40º to +250ºC
10KF3950DPGN 10,000 ± 1% 3950 ± 2% -40º to +250ºC
10KF3960DPGN 10,000 ± 1% 3960 ± 2% -40º to +250ºC
10KF3975DPGS 10,000 ± 1% 3975 ± 2% -40º to +200ºC
20KF3960DPGN 20,000 ± 1% 3960 ± 2% -40º to +250ºC
50KF3950DPGN 50,000 ± 1% 3950 ± 2% -40º to +250ºC
50KF3960DPGN 50,000 ± 1% 3960 ± 2% -40º to +250ºC
100KF3975DPGN 100,000 ± 1% 3975 ± 2% -40º to +250ºC
100KF4300DPGN 100,000 ± 1% 4300 ± 2% -40º to +250ºC
200KF4000DPGN 200,000 ± 1% 4000 ± 2% -40º to +250ºC
The information in this sheet has been carefully reviewed and is
believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this
information does not convey to the purchaser of such devices any
license under the patent rights to the manufacturer. Measurement
Specialties, Inc. reserves the right
to make changes without further notice to any product herein.
Measurement Specialties, Inc. makes no warranty, representation or
guarantee regarding the suitability of
its product for any particular purpose, nor does Measurement
Specialties, Inc. assume any liability arising out of the
application or use of any product or circuit and
specifically disclaims any and all liability, including without
limitation consequential or incidental damages. Typical parameters
can and do vary in different applications.
All operating parameters must be validated for each customer
application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license
under its patent rights nor the rights of others.
